Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2003PASSAT SEDAN 4MOTION (3B3) W8-4.0L (BDP)REPAIR AND DIAGNOSISTRANSMISSION AND DRIVETRAINAUTOMATIC TRANSMISSION/TRANSAXLESHIFT INTERLOCKSERVICE AND REPAIRSECURING SPRING FOR LOCKING CABLE
2003 Volkswagen Passat Sedan 4Motion (3B3) W8-4.0L (BDP)
Securing Spring For Locking Cable
2003 Volkswagen Passat Sedan 4Motion (3B3) W8-4.0L (BDP)SECTION Securing Spring For Locking Cable
Removing and installing securing spring for locking cable
Removing
Remove center console and extension.
- Lift spring slightly at the top -arrow B- and pull locking cable out of mounting bracket.
- Disengage spring -arrow A- from retainer lug -arrow C- and lift out.
Installing
- Insert spring from above -arrow B- and engage under retaining lug -arrow C-.
- Align spring so that it lies level in groove -arrow A-.
- Lift spring slightly at the top -arrow B- and insert locking cable in mounting bracket.
- Install central console and extension.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.