SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2003PASSAT SEDAN 4MOTION (3B3) V6-2.8L (ATQ)REPAIR AND DIAGNOSISWINDOWS AND GLASSWINDSHIELDSERVICE AND REPAIRWINDSHIELD, ASSEMBLY OVERVIEW
2003 Volkswagen Passat Sedan 4Motion (3B3) V6-2.8L (ATQ)

Windshield, Assembly Overview

2003 Volkswagen Passat Sedan 4Motion (3B3) V6-2.8L (ATQ)SECTION Windshield, Assembly Overview


Windshield, Assembly Overview







1 - Retaining strip
- Self adhering

2 - Water deflector
3 - Dimension - a - = 4 mm
4 - Sealing lip (component part of pre-coating)
5 - PUR adhesive sealant
- Bead cross section.
- Width = 7 mm
- Height = 11 mm
- Including pre-coating of residual material on window and window flange.
- Minimum curing time.

6 - Window adjuster 443 845 631 A
7 - Windshield
8 - Water deflector
9 - Clip
10 - Plenum chamber cover
- Clipped and bolted
- Plenum chamber cover must only be pulled off by hand.
- Removing plenum chamber cover:
- Installing plenum chamber cover:

11 - Screw
12 - Transport protection
- Must be removed before installing window.

13 - Retaining strip for plenum chamber cover
14 - Dimension - b - = 3.5 mm
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.