Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2003PASSAT SEDAN 4MOTION (3B3) V6-2.8L (ATQ)REPAIR AND DIAGNOSISDIAGRAMSEXPLODED VIEWSSHIFTER A/T
2003 Volkswagen Passat Sedan 4Motion (3B3) V6-2.8L (ATQ)
Shifter A/T
2003 Volkswagen Passat Sedan 4Motion (3B3) V6-2.8L (ATQ)SECTION Shifter A/T
Shift mechanism (layout), disassembling and assembling
1. Selector lever handle
2. Sleeve
3. Cover
4. Guide sleeve
5. Cover molding
6. Trim piece
7. Symbol panel
8. Cover strip
9. Guide
10. Mounting bush
11. Locking plate
12. Pull rod
13. Spring
14. Selector lever
15. Stop buffer
16. Detent
17. Cable lever
18. Spring clip with roller
19. Spring clip with roller
20. Frame
21. Nut, 10 Nm
22. Mounting bracket
23. Fulcrum pin
24. Locking pawl
25. Shift lock solenoid -N110
26. Fulcrum pin
27. Cover
28. Nut, 10 Nm
29. Securing clip
30. Locking plate
31. Selector lever cable
32. Hex bolt, 23 Nm
33. Support bracket
34. Bracket
35. Cable clip
36. Ignition/starter - switch
37. Locking cable
38. Locking cable lever
39. Securing spring
40. Mounting
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.