Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2003PASSAT SEDAN (3B3) V6-2.8L (ATQ)REPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER BLOCK ASSEMBLYSYSTEM SPECIFICATIONSGENERAL
2003 Volkswagen Passat Sedan (3B3) V6-2.8L (ATQ)
General
2003 Volkswagen Passat Sedan (3B3) V6-2.8L (ATQ)SECTION General
| Cylinder head bolts | all bolts Always replace | 60 Nm |
| 1/4 turn further | ||
| another 1/4 turn further | ||
| Intake manifold | Bolts | 10 Nm |
| Exhaust pipe to Exhaust manifold | Bolts | 25 Nm |
| Cylinder Head | Max. distortion | 0.05 mm |
| Camshaft Sprocket | Bolt | 55 Nm |
| Camshaft Bearing Cap | Bolts | 10 Nm |
| Honing Dimensions | Piston Diameter | Cylinder Bore Diameter |
| Basic Dimension | 82.485 mm | 82.51 mm |
| 1st Oversize | 82.735 mm | 82.76 mm |
| 2nd Oversize | 82.985 mm | 83.01 mm |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.