Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2003PASSAT SEDAN (3B3) V6-2.8L (ATQ)REPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSAUTOMATIC TRANSMISSION/TRANSAXLESYSTEM SPECIFICATIONS
2003 Volkswagen Passat Sedan (3B3) V6-2.8L (ATQ)
System Specifications
2003 Volkswagen Passat Sedan (3B3) V6-2.8L (ATQ)SECTION System Specifications
| Transmission Pan | Bolts | 10 Nm Tighten in several stages in diagonal sequence |
| Drain Plug | 40 Nm Always replace | |
| Valve Body | Securing Bolt | 8 Nm |
| Transmission Vehicle speed sensor | Bolt | 6 Nm |
| Multifunction Transmission Range Sensor | Securing Bolt | 8 Nm |
| Transmission RPM sensor | Bolt | 6 Nm |
| Pressure Control Valve | Retaining Bolt | 6 Nm |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.