Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2003PASSAT SEDAN (3B3) L4-1.8L TURBO (AWM)REPAIR AND DIAGNOSISCRUISE CONTROLTESTING AND INSPECTIONPROGRAMMING AND RELEARNING
2003 Volkswagen Passat Sedan (3B3) L4-1.8L Turbo (AWM)
Programming and Relearning
2003 Volkswagen Passat Sedan (3B3) L4-1.8L Turbo (AWM)SECTION Programming and Relearning
Cruise Control System (CCS), Activating and Deactivating
Activating cruise control system
- Connect V.A.G 1551/1552 Scan Tool (ST).
- Press buttons -0- and -1- to insert "Engine electronics" address word "01".
Indicated on display:
Rapid data transfer HELP
Select function XX
- Press buttons -1- and -1- to select "Log-in procedure" function 11.
- Press -Q- button to confirm input.
Indicated on display:
Rapid data transfer HELP
Select function XX
- Enter code number 11463.
- Press -Q- button to confirm input.
Deactivating cruise control system
- Connect VAG 1551/1552 Scan Tool (ST).
- Press buttons -0- and -1- to insert "Engine electronics" address word "01".
Indicated on display:
Rapid data transfer HELP
Select function XX
- Press buttons -1- and -1- to select "Log-in procedure" function 11.
- Press -Q- button to confirm input.
Indicated on display:
Rapid data transfer HELP
Select function XX
- Enter code number 16167.
- Press -Q- button to confirm input.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.