Code Control Module (Function 07)

Code Control Module (function 07)

By using the code control module function the radio can be coded as follows:
- VAG1551 scan tool connected ("Radio" address word 56); press -> button to advance program sequence

Coding
- Press buttons -0- and -7- to select function 07 "Code Control Module"..
- Press -Q- button to confirm input.

Indicated on display


Code Control Module
Input code number XXXXX (0-32000)


Radio Coding (non-Monsoon)
- 06401- for vehicles without CD-changer (if CD-changer is installed later, radio code must be changed accordingly)
- 06403- for vehicles with CD-changer

Indicated on display


Code Control Module Q
Input code number 06401 (0-32000)


- Press -Q- button to confirm input.

Indicated on display


Rapid data transfer HELP
Select function XX


Radio Coding (Monsoon)
- 06031 - for New Beetle USA, no passive loudspeakers, Monsoon 2-door, active antenna and no CD changer
- 06033 - for New Beetle USA, no passive loudspeakers, Monsoon 2-door, active antenna and CD changer

Indicated on display


Code Control Module Q
Input code number 06031 (0-32000)


- Press -Q- button to confirm input.

Indicated on display


Rapid data transfer HELP
Select function XX


Radio coding for all radios
End function:
- Press buttons -0- and -6- to select function 06 "End Output".
- End coding by pressing -> button.

Indicated on display


Rapid data transfer Q
06 - End Output


- Press -Q- button to confirm input.

Indicated on display


Rapid data transfer HELP
Insert address word XX


Scan tool returns to start of program sequence.