Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2003GTI (1J1) L4-1.8L TURBO (AWP)REPAIR AND DIAGNOSISACCESSORIES AND OPTIONAL EQUIPMENTRADIO, STEREO, AND COMPACT DISCTESTING AND INSPECTIONPROGRAMMING AND RELEARNINGCODE CONTROL MODULE (RADIO) (FUNCTION 07)
2003 Volkswagen GTI (1J1) L4-1.8L Turbo (AWP)
Code Control Module (Radio) (Function 07)
2003 Volkswagen GTI (1J1) L4-1.8L Turbo (AWP)SECTION Code Control Module (Radio) (Function 07)
Code Control Module (Radio) (Function 07)
Use this function to code the radio with the various equipment variations available.
Coding
- Connect VAG 1551 Scan Tool (ST), input address word 56 "Radio" and then press -B button, until "Select function XX" is shown in display.
Indicated on display (select function):
Rapid data transfer HELP
Select function XX
- Press buttons -0- and -7- to select "Code control module" function 07 ".
- Press -Q- button to confirm input.
- Indicated on display:
Coding control module
Enter code number (0-32000)
Coding possibilities
- Check/enter applicable code number from code table using model and equipment particulars.
Coding example: 00401 = Golf/Jetta with radio system "Premium VI" - without multi-function steering wheel.
- Indicated on display (example only):
Coding control module Q
Enter code number 00401 (0-32000)
- Press -Q- button to confirm input.
Indicated on display (select function):
Rapid data transfer HELP
Select function XX
- End output (function 06).
Code table
Coding example: 00401 = Golf/Jetta with radio system "Premium VI" - without multi-function steering wheel.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.