Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2003EUROVAN V6-2.8L (AXK)REPAIR AND DIAGNOSISSTEERING AND SUSPENSIONALIGNMENTTESTING AND INSPECTIONLONGITUDINAL INCLINATION MEASUREMENT
2003 Volkswagen Eurovan V6-2.8L (AXK)
Longitudinal Inclination Measurement
2003 Volkswagen Eurovan V6-2.8L (AXK)SECTION Longitudinal Inclination Measurement
Measure longitudinal inclination at long member.
If vehicle is inclined to front or rear, deduct or add value measured according to inclination of vehicle.
Example:
Figure obtained from
alignment instrument 1°10'
Correction vehicle for
vehicle inclination
(e.g. 1° forward) + 1°00' _______________________________________
Caster (for vehicle
inclination of 1°forward) 2°10'
NOTE:
^ Vehicle inclined forward: add correction figure.
^ Vehicle inclined rearward: deduct correction figure.
^ Ensure long member surface is clean and smooth in measurement area.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.