Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2003EUROVAN V6-2.8L (AXK)REPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSFLEX PLATE
2003 Volkswagen Eurovan V6-2.8L (AXK)
Flex Plate
2003 Volkswagen Eurovan V6-2.8L (AXK)SECTION Flex Plate
Drive plate, removing and installing
Loosen and remove securing bolts of drive plate in diagonal sequence.
Drive Plate Depth Measurement Specified & Mean Values
Insert at least 3 old securing bolts into Drive plate and tighten to 30 Nm.
Measure dimension -a- via 3 holes for converter securing via assisting ruler and depth measurement and calculate mean value.
Specification: 15.7 to 16.5 mm
Drive Plate Securing Bolts 60 Nm
- + 90 ° (1/4 turn)
- (The additional 90 ° (1/4 turn) rotation can occur in several stages).
- Use new Drive Plate Securing bolts.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.