Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2003EUROVAN V6-2.8L (AXK)REPAIR AND DIAGNOSISHEATING AND AIR CONDITIONINGTESTING AND INSPECTIONSCAN TOOL TESTING AND PROCEDURESSELECTABLE FUNCTIONS WHEN USING VAG 1551/1552 OR VAS 5051
2003 Volkswagen Eurovan V6-2.8L (AXK)
Selectable Functions When Using VAG 1551/1552 or Vas 5051
2003 Volkswagen Eurovan V6-2.8L (AXK)SECTION Selectable Functions When Using VAG 1551/1552 or Vas 5051
OBD Function
List of available functions
List of Scan Tool Functions:
01 Check Control Module Version
02 Check DTC Memory
03 Output Diagnostic Test Mode
05 Erase DTC Memory
06 End Output
07 Code Control Module
08 Read Measuring Value Block
NOTE:
Only the functions listed here can be used for AC/Heating On Board Diagnostic (OBD) program
After pressing the -> button, the OBD program returns to the starting position.
Indicated on display (function selection, e.g. 02 - Checking DTC memory)
Rapid data transfer HELP
select function XX
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.