Reading

Read Measuring Value Block (Scan Tool Function 08)


NOTE:
- During the function "Read Measuring Value Block" all Climatronic functions and automatic regulation take place.
- 7 display groups (measuring value blocks) each contain 4 display fields (measuring values).
- If it becomes necessary to read measured values while driving, please use an assistant.


Initiating Read Measuring Value Block
- Connect Scan Tool (ST) VAG 1551 and input address word "08 AC/Heating electronics" and then press -> button, until "Select function XX" is shown in display. Scan Tool Connecting and Initial Checks

Indicated on display (function selection):


Rapid data transfer HELP
Select function XX


- Press buttons -0- and -8- to select the "Read Measuring Value Block" function 08.

Indicated on display


Rapid data transfer Q
08 Read Measuring Value Block


- Press -Q- button to confirm input.

Indicated on display


Read Measuring Value Block
Input display group number XX


Table of selectable display group numbers

Display Group 001 - 003:

Display Group 004 - 008:

Indicated on display


Read Measuring Value Block 1 ->
1 2 3 4


NOTE:
- Decoding display zones readouts See Test table. Evaluating Measured Value Blocks
- With the printer switched on the information on the display will be printed-out.
- If the specifications are attained in all display zones:


- Press -> button.

Indicated on display (function selection):


Rapid data transfer HELP
Select function XX


NOTE: After completing the "Read Measuring Value Block" function check DTC Memory. Displaying and Reading Trouble Codes