Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2003EUROVAN V6-2.8L (AXK)REPAIR AND DIAGNOSISBODY AND FRAMESEATSSERVICE AND REPAIRMULTIVANBEDBOARD AND SUPPORT FRAME, REMOVING
2003 Volkswagen Eurovan V6-2.8L (AXK)
Bedboard And Support Frame, Removing
2003 Volkswagen Eurovan V6-2.8L (AXK)SECTION Bedboard And Support Frame, Removing
Bedboard And Support Frame, Removing
- Remove cushion padding.
- Pull back catch - 1 - - arrows - and take bedboard - 2 - out of vehicle.
- Remove side panel molded trim at rear left/right.
- Remove tool kit.
- Remove support frame bolts - 1 -, - 2 - and - 3 -.
- Lift support frame at back - arrow - and remove left or right.
Tightening torques:
Hex bolt - 1 - = 22 Nm (16 ft lb)
Hex bolt - 2 - = 20 Nm (15 ft lb)
Hex bolt - 3 - = 40 Nm (30 ft lb)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.