Adapting A New, Additional Key

Adapting A New, Additional Key From 05.00

Using VAG1551 Scan Tool (ST)

- Connect Scan Tool (ST)
- Initiate On Board Diagnostic (OBD)

Rapid data transfer HELP
Select function XX

Indicated on display:
- Press buttons - 1 - and - 0 - to select "Adaptation", function 10.

Rapid data transfer
10 - Adaptation

Indicated on display:
- Press - Q - button to confirm input.

Adaptation
Enter channel number XX

Indicated on display:
- Press buttons - 0 - and - 1 -.

Adaptation
Enter channel number 01

Indicated on display:
- Press -Q- button to confirm input.

Channel 1......adaptation 1 -->
Key 1<-13->

Indicated on display:
The upper line indicates how many keys are supposed to be adapted (1).

Channel 1......adaptation 1
Enter adaptation value XXXXX

Indicated on display:
- Press the - 0 - button four times and then the - 1 - button.
- Press - Q - button to confirm input.

Channel 1 adaptation 1
Key 1<-1 3->

Indicated on display: Number of radio-frequency keys to be adapted.
- Press -Q- button to confirm input.

Channel 1 adaptation 1 -->
Store modified value?

Indicated on display:
- Press - Q - button to confirm input.

Channel 1 adaptation 1 -->
Modified value has been stored

Indicated on display:
- Press --> button.

Rapid data transfer HELP
Select function XX

Indicated on display:
- Press one button on the radio-frequency key for at least 1 second within the next 15 seconds.
- Switch ignition off and remove ignition key.
- Perform function test of the radio-frequency key.

NOTE: Initialization is complete when the time of 15 seconds has been exceeded, no free key positions are available or the key has been adapted successfully.

Without VAG1551 Scan Tool (ST)
- Insert mechanically appropriate (old) ignition key into ignition lock.
- Switch on ignition.
- Switch ignition off within 5 seconds.
- Switch ignition on again within 5 seconds.
- Using the new key (being adapted), mechanically lock the vehicle within 15 seconds (i.e. driver-side door) or lock it via the internal locking switch and then operate the radio-frequency button on the key.
- After a pause of more than one second (but within 30 seconds), operate the radio-frequency button on the key a second time.
- The adaptation procedure has been completed and is confirmed when the vehicle blinks twice.

NOTE: This adaptation fills the next free key position, i.e. the fourth in this example.