Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Measuring Value Blocks (function 08)
2003 Volkswagen Eurovan V6-2.8L (AXK)SECTION Measuring Value Blocks (function 08)
Read Measuring Value Block (function 08)
Measuring value blocks are divided into 3 display groups. Assignment of the individual display fields is found in display group overview.
After control module identification is displayed:
- Press -> button.
Indicated on display:
Rapid data transfer HELP
Select function XX
- Press buttons -0- and -8- to select function 08, "Read measuring value block".
Indicated on display:
Rapid data transfer Q
08 - Read measuring value block
- Press -Q- button to confirm input.
Indicated on display:
Read measuring value block HELP
Enter display group number XXX
Selectable display group numbers, overview
Indicated on display: (1 to 4 display fields)
Read measuring value block XXX ->
1 2 3 4
Read measuring value blocks, designations:
Display group 001
- Press buttons -0-, -0- and -1- to select "Display group number 001".
- Press -Q- button to confirm input.
Indicated on display (Values displayed here are examples only!!):
Read measuring value block 1 ->
10400 1 1 1
Display Group 001:
Display group 002
Indicated on display (Values displayed here are examples only!!):
Read measuring value block 2 ->
1 1 1 3
Display Group 002:
Display group 005
Indicated on display (Values displayed here are examples only!!):
Read measuring value block 5 ->
0.0s 3 3 0000
Display Group 005:
- Press -> button to end "Read measuring value block" function.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.