Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2001JETTA GL SEDAN (9M2) L4-2.0L (AEG)REPAIR AND DIAGNOSISBODY AND FRAMELOCKSKEYLESS ENTRYKEYLESS ENTRY TRANSMITTERKEYLESS ENTRY TRANSMITTER BATTERYSERVICE AND REPAIRUP TO 04/2001BATTERIES FOR KEY WITH RADIO REMOTE CONTROL (FOLDABLE), REMOVING AND INSTALLING
2001 Volkswagen Jetta GL Sedan (9M2) L4-2.0L (AEG)
Batteries For Key With Radio Remote Control (Foldable), Removing and Installing
2001 Volkswagen Jetta GL Sedan (9M2) L4-2.0L (AEG)SECTION Batteries For Key With Radio Remote Control (Foldable), Removing and Installing
Batteries For Key With Radio Remote Control (foldable), Removing And Installing --> 04.01
1. Radio-frequency unit - upper part
2. Key with variable code transponder
3. Radio-frequency unit - lower part
4. Battery
Removing
- Insert screwdriver in slot between radio-frequency unit - 1 - and key - 2 -.
- Rotate screwdriver in direction of - arrow - and detach radio frequency unit from key.
- Press radio-frequency apart unit in direction of - arrow -.
- Use a screwdriver to pry batteries out of holders in direction of - arrow -.
Installing
Note polarity and installation position of batteries when installing.
- Place batteries in radio-frequency unit with positive terminal downward (positive terminal is marked in housing).
- Press on battery with light pressure to engage it in radio-frequency unit.
- Reattach cover to radio-frequency unit (do not damage seal).
- Then engage radio-frequency unit on key.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.