Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2000JETTA SEDAN (9M2) V6-2.8L (AFP)REPAIR AND DIAGNOSISSTEERING AND SUSPENSIONSTEERINGSTEERING COLUMNSERVICE AND REPAIRSTEERING COLUMN CROSS MEMBER, ASSEMBLY OVERVIEW
2000 Volkswagen Jetta Sedan (9M2) V6-2.8L (AFP)
Steering Column Cross Member, Assembly Overview
2000 Volkswagen Jetta Sedan (9M2) V6-2.8L (AFP)SECTION Steering Column Cross Member, Assembly Overview
1. Cross member for steering column
2. Adjustment bracket
3. Bolt
^ 25 Nm (18 ft. lbs.)
4. Strut, right
5. Bolt
6. Speed nut
7. Strut, left
8. Steering column
^ 2 versions
^ Identifying
9. Steering lock housing
10. Plug
11. Bulkhead - reinforcement
12. Socket head multipoint bolt
^ 10 Nm (89 ft. lbs.)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.