Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2000JETTA SEDAN (9M2) V6-2.8L (AFP)REPAIR AND DIAGNOSISPOWER AND GROUND DISTRIBUTIONRELAY BOXSERVICE AND REPAIRPROTECTIVE RELAY HOUSING IN ENGINE COMPARTMENT
2000 Volkswagen Jetta Sedan (9M2) V6-2.8L (AFP)
Protective Relay Housing In Engine Compartment
2000 Volkswagen Jetta Sedan (9M2) V6-2.8L (AFP)SECTION Protective Relay Housing In Engine Compartment
Protective Housing For Relays In Engine Compartment, Removing And Installing
Removing
- Remove cover
- Press locking lug -arrow- forward and take protective housing off upward out of guides.
- Press sides of housing of lower part outward and release carrier plate from locking device.
Installing
Install in reverse order of removal.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.