Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2000GTI (1J1) L4-1.8L TURBO (AWD)REPAIR AND DIAGNOSISTRANSMISSION AND DRIVETRAINAUTOMATIC TRANSMISSION/TRANSAXLETESTING AND INSPECTIONSCAN TOOL TESTING AND PROCEDURESSCAN TOOL TESTING - 4 SPEED AUTOMATIC 01MMEASURING VALUE BLOCKS (FUNCTION 08)READING
2000 Volkswagen GTI (1J1) L4-1.8L Turbo (AWD)
Reading
2000 Volkswagen GTI (1J1) L4-1.8L Turbo (AWD)SECTION Reading
Measured Value Block, Reading
- Connect VAG 1551 Scan Tool and enter address word "02 Transmission electronics". Advance until "Select function XX" is indicated on display Connecting VAG 1551 Scan Tool
Indicated on display
Rapid data transfer HELP
Select function XX
- Press buttons -0- and -8- to select "Read measured value block" function 08.
Indicated on display
Rapid data transfer Q
08 - Read measured value block
- Confirm entry with -Q- button.
Indicated on display
Read measured value block
Enter display group number XXX
- Enter display group number.
- Confirm entry with -Q- button.
There are always 4 display fields in the measured value block (in actual physical quantities if necessary). Decoding the individual values in display fields 1 to 4 See Test table.
Read measured value block 1->
->1 ->2 ->3 ->4
List of selectable display group numbers
NOTE:
- If the printer is switched on, the current display is printed out.
- If the specified values are reached in all the display fields:
- Press -> key.
Indicated on display
Rapid data transfer HELP
Select function XX
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.