Read Measured Value Block (Function 08)

Special tools and equipment
- VAG 1551 scan tool with cable VAG 1551/3

- Connect scan tool. VAG 1551 Scan Tool Connecting
Initiate OBD. Initiating On Board Diagnostic Program

The measured values in "Read measured value block" and "Basic setting" are described during the individual component test. This table serves only as an overview.

The measured value block is divided into 10 display group numbers. The assignment of the individual display zones can be taken from the display group overview. Read Measured Value Block (Function 08)

Indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons -0- and -8- to select "Read measured value block" function 08.

Indicated on display


Rapid data transfer Q
08 - Read measured value block


- Confirm entry with -Q- button.

Indicated on display


Read measured value block HELP
Input display group number XX


NOTE: The following display group number, 001, is an example to illustrate the sequence.


- Press buttons -0-, -0- and -1- to select "Display group number 1" confirm entry with -Q- button.

Indicated on display: (1 - 4 = Display fields)


Read measured value block 1 ->
1 2 3 4


NOTE: To change to another display group proceed as follows:







Displayed after pressing -C- button:

Indicated on display


Read measured value block HELP
Input display group number XXX


- Enter display group number required.


Display Group Overview

Display Content For Display Group 001:

Evaluating Display Group 001:

Display Content For Display Group 002:

Evaluating Display Group 002:

Display Content For Display Group 003:

Evaluating Display Group 003:

Display Content For Display Group 004:

Evaluating Display Group 004:

Display Content For Display Group 005:

Evaluating Display Group 005:

Display Content For Display Group 006:

Evaluating Display Group 006, Part 1:

Evaluating Display Group 006, Part 2:

Display Content For Display Group 007:

Evaluating Display Group 007:

Display Content For Display Group 008:

Evaluating Display Group Number 008:

Display Content For Display Group 009:

Evaluating Display Group 009:

Display Content For Display Group 010:

Evaluating Display Group 010:

Possible Display
Rear lid/tailgate contact switch 1
Right rear rotary latch switch 2
Left rear rotary latch switch 4
Front passenger rotary latch 8
switch
Ignition 16
Interior monitor 32
Hood contact switch 64
Driver's rotary latch switch 128
No alarm 255