SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN1999PASSAT SEDAN (3B2) V6-2.8L (AHA)REPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSINFORMATION BUSTESTING AND INSPECTIONSCAN TOOL TESTING AND PROCEDURESMEASURING VALUE BLOCKS (FUNCTION 08)READING
1999 Volkswagen Passat Sedan (3B2) V6-2.8L (AHA)

Reading

1999 Volkswagen Passat Sedan (3B2) V6-2.8L (AHA)SECTION Reading




Read Measuring Value Block (function 08)

Indicated on display:


Rapid data transfer HELP
Select function XX


- Press buttons -0- and -8- to initiate "Read Measuring Value Block", function 08.

Indicated on display:


Rapid data transfer Q
08 - Read Measuring Value Block


- Press -Q- button to confirm input.

Indicated on display:


Read Measuring Value Block
Enter display group number XXX


Overview of selectable display group numbers

Display group Display field in display
001 1 = voltage supply in volts
2 = Light switch condition
3 = Speed in km/h
4 = Acceleration in m/s2
002 1 = Voltage of front level sensor in volts
2 = Voltage of level sensor rear, in volts
3 = Specification for actuator motors in %
4 = Time constant in s

- Select desired display group number and press -Q- button to confirm.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.