Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN1999PASSAT SEDAN (3B2) V6-2.8L (AHA)REPAIR AND DIAGNOSISBODY AND FRAMESPECIFICATIONS
1999 Volkswagen Passat Sedan (3B2) V6-2.8L (AHA)
Body and Frame: Specifications
1999 Volkswagen Passat Sedan (3B2) V6-2.8L (AHA)SECTION Specifications
| Tailgate Lock | 23 Newton Meter (Nm) |
| Tailgate Release Actuator | 7 Newton Meter (Nm) |
| Tailgate Lock Cylinder Carrier Nut | 7 Newton Meter (Nm) |
| Rear Lid Central Locking Actuator Nut | 7 Newton Meter (Nm) |
| Rear Lid Lock Cylinder Carrier Nut | 7 Newton Meter (Nm) |
| Roof Rack Rail Securing Nuts | 20 Newton Meter (Nm) |
| Front Fender Speed Nut/Torx Bolt | 6 Newton Meter (Nm) |
| Lower Engine Sound Reflector Mounting Screws | 2 Newton Meter (Nm) |
| Lock Carrier Mounting Bolts | 50 Newton Meter (Nm) |
| Front Bumper Cover Bolts | 20 Newton Meter (Nm) |
| Front Bumper Guide Bolts | 2 Newton Meter (Nm) |
| Bumper Impact Absorber Bolts | 50 Newton Meter (Nm) |
| Bumper Spoiler Bolts | 3 Newton Meter (Nm) |
| Bumper Quick Release Bolts | 2 Newton Meter (Nm) |
| Rear Bumper Cover Bolts | 15 Newton Meter (Nm) |
| Rear Bumper Beam Bolts | 30 +/- 1/2 turn Newton Meter (Nm) |
| Rear Bumper Guide Bolts | 1.2 Newton Meter (Nm) |
| Rear Impact Damper Bolt | 6 Newton Meter (Nm) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.