Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN1999JETTA SEDAN (9M2) V6-2.8L (AFP)REPAIR AND DIAGNOSISRESTRAINTS AND SAFETY SYSTEMSAIR BAG SYSTEMSTESTING AND INSPECTIONSCAN TOOL TESTING AND PROCEDURESSCAN TOOL TESTINGSCAN TOOL CONNECTING AND INITIAL CHECKSCHECK CONTROL MODULE VERSION
1999 Volkswagen Jetta Sedan (9M2) V6-2.8L (AFP)
Check Control Module Version
1999 Volkswagen Jetta Sedan (9M2) V6-2.8L (AFP)SECTION Check Control Module Version
Check Control Module Version
- Connecting scan tool, initiating On Board Diagnostic (OBD).
Scan Tool Connecting and Initial Checks
General Information
- Switch on printer with Print button (warning lamp in button lights up).
- Press keys -0- and -1-.
Indicated on display;
Rapid data transfer Q
01-Check Control Module Version
- Confirm entry with the -Q- button.
Control module VW3 (example)
Indicated on display.
1J0 909 609 A AIRBAG VW 3 SG V03 ->
Coding 00068 WSC12345
Top line
- 1J0 909 609 A = Control module Part No.
- Airbag VW3 = System designation
- S = Side airbag, G = Elect. belt tensioner
- V03 = software version number
Lower line
- Coding XXXXX = Coding variants
- WSC XXXXX = Dealership number (Will be automatically stored in the control module when entering the system)
- Press -> button.
Indicated on display:
Rapid data transfer HELP
Enter address word XX
Control module VW5 (example)
Indicated on display.
6Q0909605 A OF AIRBAG VW5 02 0004 ->
Coding 12358 WSC12345
Top line
- 6Q0909605 A = Control module Part No.
- 0F = Index
- Airbag VW5 = System designation
- 02 = version number crash sensor
- 0004 = software version number
Lower line
- Coding XXXXX = Coding variants
- WSC XXXXX = Dealership number (Will be automatically stored in the control module when entering the system)
- Press -> button.
Indicated on display:
Rapid data transfer HELP
Enter address word XX
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.