Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN1999JETTA SEDAN (9M2) V6-2.8L (AFP)REPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTIGNITION SYSTEMSPARK PLUGAPPLICATION AND ID
1999 Volkswagen Jetta Sedan (9M2) V6-2.8L (AFP)
Spark Plug: Application and ID
1999 Volkswagen Jetta Sedan (9M2) V6-2.8L (AFP)SECTION Application and ID
Engine Code AFP
Spark plugs 1)
VW Audi 101 000 035 AH
Manufacturers Code BKR 5 EKUP
Electrode gap max. 0.7
Tightening torque 25 Nm (18 ft lb)
1) Use tool T10029 for disconnecting and connecting the spark plug connector. Remove and install the spark plugs using tool 3122B
Spark plugs 1)
VW Audi 101 000 035 AH
Manufacturers Code BKR 5 EKUP
Electrode gap max. 0.7
Tightening torque 25 Nm (18 ft lb)
1) Use tool T10029 for disconnecting and connecting the spark plug connector. Remove and install the spark plugs using tool 3122B
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.