Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN1999GOLF (1J1) L4-2.0L (AEG)REPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER BLOCK ASSEMBLYSYSTEM SPECIFICATIONSCONNECTING ROD BEARING CLEARANCE
1999 Volkswagen Golf (1J1) L4-2.0L (AEG)
Connecting Rod Bearing Clearance
1999 Volkswagen Golf (1J1) L4-2.0L (AEG)SECTION Connecting Rod Bearing Clearance
DIMENSIONS
Axial Clearance:
New 0.5-0.35 mm (0.0020-0.0137 inch)
Wear Limit 0.40 mm (0.0157 inch)
Radial Clearance:
New 0.01-0.06 mm (0.0004-0.0024 inch)
Wear Limit 0.12 mm (0.0047 inch)
NOTE:
- Check radial clearance with Plastigage:
- Do not rotate crankshaft when checking radial clearance.
Axial Clearance:
New 0.5-0.35 mm (0.0020-0.0137 inch)
Wear Limit 0.40 mm (0.0157 inch)
Radial Clearance:
New 0.01-0.06 mm (0.0004-0.0024 inch)
Wear Limit 0.12 mm (0.0047 inch)
NOTE:
- Check radial clearance with Plastigage:
- Do not rotate crankshaft when checking radial clearance.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.