Engine Mount

1999 Volkswagen GTI (1W1) V6-2.8L (AAA)SECTION Engine Mount
TIGHTENING TORQUE
Front Engine/Transmission Mount
Bracket To Mount 60 Nm (44 ft. lbs.)
Bracket To Engine/Transmissions 60 Nm (44 ft. lbs.)
Mount To Frame 55 Nm (41 ft. lbs.)

Right Rear Engine Mount
Bracket To Engine 60 Nm (44 ft. lbs.)
Bracket To Mount 60 Nm (44 ft. lbs.)
Mount To Frame 25 Nm (18 ft. lbs.)

Left Rear Engine/Transmission Mount
Bracket To Mount 60 Nm (44 ft. lbs.)
Bracket To Engine/Transmissions 25 Nm (18 ft. lbs.)
Bracket To frame 25 Nm (18 ft. lbs.)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.