Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN1999GTI (1W1) V6-2.8L (AAA)REPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSTESTING AND INSPECTIONSCAN TOOL TESTING AND PROCEDURESDIAGNOSIS WITH VW SCAN TOOL, ADDRESS WORD 01READINESS CODE - READING / CREATINGREADINESS CODE, READING (SCAN TOOL FUNCTION 15)
1999 Volkswagen GTI (1W1) V6-2.8L (AAA)
Readiness Code, Reading (scan tool function 15)
1999 Volkswagen GTI (1W1) V6-2.8L (AAA)SECTION Readiness Code, Reading (scan tool function 15)
Special tools, testers and auxiliary items
- VAG 1551/1552 scan tool with VAG 1551/3 adapter cable.
Work sequence:
- Connect VAG 1551/1552 scan tool and, with ignition switched on, select "Engine Electronics" address word 01. Connecting and Selecting "Engine Electronics" address word 01
Indicated on display
- Press buttons -1- and -5- to select "Readiness Code" function 15 and press -Q- button to confirm input.
- Must appear on display when all diagnosis functions have been successfully completed.
Indicated on display
- Press -> button.
- Press buttons -0- and -6- to select "End Output" function 06 and press -Q- button to confirm input.
Indicated on display (possible example)
If one diagnostic checks has not run through successfully:
- Press -> button.
- Create readiness code.
- Read the readiness code. If DTC memory has been erased, repair must be verified via appropriate display group See Readiness code, creating.
Relevance of 8-digit number block for readiness code
- VAG 1551/1552 scan tool with VAG 1551/3 adapter cable.
Work sequence:
- Connect VAG 1551/1552 scan tool and, with ignition switched on, select "Engine Electronics" address word 01. Connecting and Selecting "Engine Electronics" address word 01
Indicated on display
- Press buttons -1- and -5- to select "Readiness Code" function 15 and press -Q- button to confirm input.
- Must appear on display when all diagnosis functions have been successfully completed.
Indicated on display
- Press -> button.
- Press buttons -0- and -6- to select "End Output" function 06 and press -Q- button to confirm input.
Indicated on display (possible example)
If one diagnostic checks has not run through successfully:
- Press -> button.
- Create readiness code.
- Read the readiness code. If DTC memory has been erased, repair must be verified via appropriate display group See Readiness code, creating.
Relevance of 8-digit number block for readiness code
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.