Heating and Ventilation Controls, Assembly Overview

1999 Volkswagen GTI (1W1) V6-2.8L (AAA)SECTION Heating and Ventilation Controls, Assembly Overview


Heating And Ventilation Controls, Assembly






1 - Heating and ventilation controls
- With fresh air blower switch -E9-
- With fresh air/recirculating flap switch -E159-
2 - Illumination filter
3 - Trim panel
4 - Fresh air control lever light -L16-
- 12 V, 1.2 W
- Replacing:
- Unclip trim panel - item 7 - and rotary control - item 5-.
- Pull out bulb using a piece of fuel hose.
5 - Rotary control
- For blower speed
- To remove: Use pliers with suitable plastic or rubber protection on jaws
6 - Rotary control
- For air distribution
- To remove: Use pliers with suitable plastic or rubber protection on jaws
7 - Trim panel
8 - Rotary control
- For interior temperature control
- To remove: Use pliers with suitable plastic or rubber protection for jaws


RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.