Connecting VAS 5051 Scan Tool

1999 Volkswagen GTI (1J1) V6-2.8L (AFP)SECTION Connecting VAS 5051 Scan Tool



Vehicle Diagnosis, Testing and Information System VAS 5051, Connecting
All functions which could previously be performed with V.A.G 1551/1552 can also be performed with the new tester VAS 5051 in the vehicle self-diagnosis operating mode:

Special tools and equipment







- VAS 5051 Vehicle diagnosis, testing and information system

Additional information
- Self-study program







- Pull cover -1- off in direction of arrow.
- With ignition switched off, connect tester VAS 5051 to diagnosis connection using diagnosis cable VAS 5051/1 or VAS 5051/3.







- Switch on tester -arrow-. The tester requires approx. 5 minutes to warm up.
- Switch ignition on.
- Select zone "Vehicle self-diagnosis" on touch screen.

The display will now provide a guide to further selections.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.