Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN1999GTI (1J1) V6-2.8L (AFP)REPAIR AND DIAGNOSISTRANSMISSION AND DRIVETRAINAUTOMATIC TRANSMISSION/TRANSAXLETESTING AND INSPECTIONSCAN TOOL TESTING AND PROCEDURESSCAN TOOL TESTING - 5 SPEED AUTOMATIC 09AMEASURING VALUE BLOCKS (FUNCTION 08)READING
1999 Volkswagen GTI (1J1) V6-2.8L (AFP)
Reading
1999 Volkswagen GTI (1J1) V6-2.8L (AFP)SECTION Reading
Measured Value Block, Reading
- Connect V.A.G 1551 Scan Tool and enter address word "02 Transmission electronics" and advance until "Select function XX" indicated on display Connecting VAG 1551 Scan Tool
Indicated on display
Rapid data transfer HELP
Select function XX
- Press keys 0 and 8 to select "Read measured value block".
Indicated on display
Rapid data transfer Q
08 - Read measured value block
- Confirm entry with key Q.
Indicated on display
Read measured value block
Enter display group number XXX
- Enter display group number.
- Confirm entry with key Q.
- There are always 4 display zones in the measured value block. Decoding the individual values in display zones 1 to 4 Evaluating Measured Value Blocks
Read measured value block 1 ->
->1 ->2 ->3 ->4
List of selectable display group numbers
NOTE:
- If the printer is switched on, the current display is printed out on the log.
If the specified values are obtained in all the display zones:
- Press key ->..
Indicated on display
Rapid data transfer HELP
Select function XX
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.