Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN1999GTI (1J1) V6-2.8L (AFP)REPAIR AND DIAGNOSISBODY AND FRAMEBODY CONTROL SYSTEMSTESTING AND INSPECTIONCENTRAL LOCKING SYSTEM (VEHICLES WITHOUT POWER WINDOWS)FUNCTION VARIATIONS
1999 Volkswagen GTI (1J1) V6-2.8L (AFP)
Function Variations
1999 Volkswagen GTI (1J1) V6-2.8L (AFP)SECTION Function Variations
NOTE: The variations listed in the chart can be called up by selecting the channel numbers 03 - 10.
The adaptation shown here is only an example.
Indicated on display
Rapid data transfer HELP
Select function XX
- Press buttons -1- and -0- to select "Adaptation" function 10.
Indicated on display
Rapid data transfer Q
10 - Adaptation
- Confirm entry with -Q- button.
Indicated on display
Adaptation
Enter channel number XX
- Press buttons -0- and -6- to select "Unlock horn sound" (channel number 06).
Indicated on display
Adaptation Q
Enter channel number 06
- Confirm entry with -Q- button.
Indicated on display
Channel 6 Adaptation 0 ->
Lock Beep 0 <-1 3->
- Press -> button.
Indicated on display
Channel 6........Adaptation 0 ->
Enter matching value XXXXX
- Press -> button.
- Press the -0- button four times and then -1- once (e.g. 00001).
Indicated on display
Channel 6......Adaptation 0 Q
Enter matching value 00001
- Confirm entry with -Q- button.
Indicated on display
Channel 6 Adaptation 1 ->
lock Beep 1 <-1 3->
- Confirm entry with -Q- button.
Indicated on display
Channel 6 Adaptation 1 Q
Store changed value?
- Confirm entry with -Q- button.
Indicated on display
Channel 6 Adaptation 1 ->
Changed value is stored
- Press -> button.
Indicated on display
Rapid data transfer HELP
Select function XX
- Press buttons -0- and -6- to select "End output" function 06.
Indicated on display:
Rapid data transfer Q
06 - End output
- Confirm entry with -Q- button.
Indicated on display
Rapid data transfer HELP
Enter address word XX
- Switch ignition off.
- Disconnect DLC to VAG 1551 scan tool.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.