SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN1999CABRIO (1V7) L4-2.0L (ABA)REPAIR AND DIAGNOSISWINDOWS AND GLASSWINDOWSSERVICE AND REPAIRSIDE WINDOW REGULATOR (POWER)
1999 Volkswagen Cabrio (1V7) L4-2.0L (ABA)

Side Window Regulator (Power)

1999 Volkswagen Cabrio (1V7) L4-2.0L (ABA)SECTION Side Window Regulator (Power)
Removing and Installing: (Also, Side Window Assembly )





- Unclip window from window regulator -arrows-.
- Push side window upward and secure (e.g. with adhesive tape).
- Lower window regulator completely.
- Separate harness connector from power window motor.
- Loosen fasteners for window regulator.





- Remove window regulator -1- by moving downward in direction of arrow.

NOTE: After installing, check side window adjustment.


RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.