SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN1999CABRIO (1V7) L4-2.0L (ABA)REPAIR AND DIAGNOSISWINDOWS AND GLASSWINDOWSSERVICE AND REPAIRSIDE WINDOW ASSEMBLY
1999 Volkswagen Cabrio (1V7) L4-2.0L (ABA)

Side Window Assembly

1999 Volkswagen Cabrio (1V7) L4-2.0L (ABA)SECTION Side Window Assembly

Side Window Assembly:





1. Door and side window seal.
2. Side window.
3. Side window height stop.
4. Hex-head bolt (7 Nm [62 in Ib]).
5. Window slot seal, inner.
- Pushed onto flange.
6. Main pillar seal, inner.
7. Main pillar seal, outer.
8. Hex-head bolt (7 Nm [62 in Ib]).
9. Window guide, rear
10. Window slot seal, outer
- Pushed onto flange
11. Guide roller
12. Hex-head bolt (7 Nm [62 in Ib]).
13. Window regulator
14. Window regulator height stop

Side Window, Removing:





- Remove side trim..
- Loosen inner main pillar seal.
- Remove inner window slot seal.
- Lower side window and unclip from window lifter -arrows-.
- Remove side window by pulling upward out of window slot.

Install in reverse order. Make necessary adjustments.

B-pillar Outer Trim, Removing:

Removing B-Pillar Outer Trim:





- Pull off door and side window seal.
- Drill out rivets -2- and remove trim -1-.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.