Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN1999CABRIO (1V7) L4-2.0L (ABA)REPAIR AND DIAGNOSISDIAGRAMSEXPLODED VIEWSFRONT DOORSYSTEM DIAGRAM
1999 Volkswagen Cabrio (1V7) L4-2.0L (ABA)
System Diagram
1999 Volkswagen Cabrio (1V7) L4-2.0L (ABA)SECTION System Diagram
Front door, assembly overview
1 - Door
- Adjusting, at hinge within oversized holes
2 - Window channel, front
3 - Outer window seal
- Pushed onto flange
4 - Window slot inner seal
- Pushed onto flange
5 - Door window
6 - Counter mount
7 - Wedge
8 - Stopper
- Must be transferred when replacing door
9 - Bolt
10 - Window channel, rear
11 - Cover
12 - Window regulator
13 - Bolt
- 23 Nm (17 ft lb)
14 - Side impact bar
@vw02cb020_57-004
15 - Door check strap boot
16 - Door check strap
17 - Bolt
- 7.5 Nm (66 in. lb)
18 - Bolt
19 - Lock nut
- 6.5 Nm (58 in. lb)
20 - Door check strap cover
- Self- adhesive - sticks on A- pillar
21 - Cap
22 - Grub screw
- 23 Nm (17 ft lb)
23 - Torx(R) bolt T45
- 36 Nm (27 ft lb)
24 - Door hinge
- Bolted to door and A-pillar. Hinge pin inserted in box section and secured with grub screw.
1 - Door
- Adjusting, at hinge within oversized holes
2 - Window channel, front
3 - Outer window seal
- Pushed onto flange
4 - Window slot inner seal
- Pushed onto flange
5 - Door window
6 - Counter mount
7 - Wedge
8 - Stopper
- Must be transferred when replacing door
9 - Bolt
10 - Window channel, rear
11 - Cover
12 - Window regulator
13 - Bolt
- 23 Nm (17 ft lb)
14 - Side impact bar
@vw02cb020_57-004
15 - Door check strap boot
16 - Door check strap
17 - Bolt
- 7.5 Nm (66 in. lb)
18 - Bolt
19 - Lock nut
- 6.5 Nm (58 in. lb)
20 - Door check strap cover
- Self- adhesive - sticks on A- pillar
21 - Cap
22 - Grub screw
- 23 Nm (17 ft lb)
23 - Torx(R) bolt T45
- 36 Nm (27 ft lb)
24 - Door hinge
- Bolted to door and A-pillar. Hinge pin inserted in box section and secured with grub screw.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.