Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN1999CABRIO (1V7) L4-2.0L (ABA)REPAIR AND DIAGNOSISBODY AND FRAMESERVICE AND REPAIR
1999 Volkswagen Cabrio (1V7) L4-2.0L (ABA)
Body and Frame: Service and Repair
1999 Volkswagen Cabrio (1V7) L4-2.0L (ABA)SECTION Service and Repair
Vibration Counterweight, Removing And Installing
1 - Nut
- Tightening torque: 46 Nm
2 - Counter weight cover
3 - Screw
4 - Counterweight
5 - Nut
- Tightening torque: 27 Nm
Removing
- Remove screws - 3 - and remove counterweight cover - 2 -.
- Remove nuts - 5 - and nut - 1 -.
- Remove counterweight.
Installing
- Install in reverse order of removal
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.