Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN1996JETTA (1H2) L4-2.0L (ABA)REPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINEENGINE MOUNT
1996 Volkswagen Jetta (1H2) L4-2.0L (ABA)
Engine Mount
1996 Volkswagen Jetta (1H2) L4-2.0L (ABA)SECTION Engine Mount
Engine/transmission mounts, tightening torques
- Specifications are for lightly oiled bolts.
Front engine/transmission mount
A 55 Nm (41 ft lb)
B 55 Nm (41 ft lb)
C 55 Nm (41 ft lb)
Right rear engine/transmission mount
A 25 Nm (l8 ft lb)
B 60 Nm (44 ft lb)
C 25 Nm (l8 ft lb)
Right engine/transmission mount (Cabrio only)
A 50 Nm (37 ft lb)
B 35 Nm (26 ft lb)
C 25 Nm (l8 ft lb)
Left rear engine/transmission mount
A 6O Nm (44 ft lb)
C 3O Nm (22 ft lb)
D 25 Nm (18 ft lb)
Front cross member to Body
Bolt 50 Nm (37 ft lb)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.