Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN1996JETTA (1H2) L4-2.0L (ABA)REPAIR AND DIAGNOSISRESTRAINTS AND SAFETY SYSTEMSAIR BAG SYSTEMSTESTING AND INSPECTIONSCAN TOOL TESTING AND PROCEDURESREADING MEASURING VALUE BLOCK (FUNCTION 08)
1996 Volkswagen Jetta (1H2) L4-2.0L (ABA)
Reading Measuring Value Block (Function 08)
1996 Volkswagen Jetta (1H2) L4-2.0L (ABA)SECTION Reading Measuring Value Block (Function 08)
WARNING:
- Check the airbag system wiring by visual inspection only
- Do not check continuity or resistance of the airbag igniter circuits.
- Switch off ignition before checking routing of wiring.
- Press buttons -0- and -8- to select "Read measuring value block" function O8
- Press -Q- button to confirm input.
- Select desired display group number and press -Q- button to confirm input.
If all displays are correct:
- Press -> button.
NOTE: For a key to the content of each display group, reference the image titled "Evaluation for display group NO. --".
NOTE: After completing checks of "Read Measuring Value Block function 08, check DTC memory.
- Check the airbag system wiring by visual inspection only
- Do not check continuity or resistance of the airbag igniter circuits.
- Switch off ignition before checking routing of wiring.
V.A.G. Display:
- Press buttons -0- and -8- to select "Read measuring value block" function O8
V.A.G. Display:
- Press -Q- button to confirm input.
V.A.G. Display:
- Select desired display group number and press -Q- button to confirm input.
V.A.G. Display:
If all displays are correct:
- Press -> button.
NOTE: For a key to the content of each display group, reference the image titled "Evaluation for display group NO. --".
V.A.G. Display:
NOTE: After completing checks of "Read Measuring Value Block function 08, check DTC memory.
Display Group 001:
Evaluation For Group 001:
Display Group 003:
Evaluation For Group 003:
Display Group 005:
Evaluation For Group 005:
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.