SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN1996JETTA (1H2) L4-2.0L (ABA)REPAIR AND DIAGNOSISRELAYS AND MODULESRELAYS AND MODULES - BRAKES AND TRACTION CONTROLELECTRONIC BRAKE CONTROL MODULEDIAGRAMSCONNECTOR VIEWS
1996 Volkswagen Jetta (1H2) L4-2.0L (ABA)

Connector Views

1996 Volkswagen Jetta (1H2) L4-2.0L (ABA)SECTION Connector Views

ABS Control Module Connector Pin Locations:






NOTE: All terminals not listed are currently not assigned and must never be connected to other components.

Terminal And Respective Component Connection
1- RR ABS Wheel Speed Sensor G44
2- LR ABS Wheel Speed Sensor G46
3- RF ABS Wheel Speed Sensor G45
4- LF ABS Wheel Speed Sensor G47
8- Ground (GND) terminal 31
9- Battery (B+) via S124
10- LR ABS Wheel Speed Sensor G46
11- LF ABS Wheel Speed Sensor G47
12- Brake light switch F
13- Connector T16/7, K wire
15- Coding bridge to terminal 21
16- ABS warning light activation
17- RR ABS Wheel Speed Sensor G44
18- RF ABS Wheel Speed Sensor G45
21- Coding bridge to terminal 15
23- Voltage supply terminal X
24- Ground (GND) terminal 31
25- Battery (B+) via S123

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.