Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN1994GOLF (1H1) L4-1.8L (ACC) CANREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER BLOCK ASSEMBLYSYSTEM SPECIFICATIONSCYLINDER BORE DIAMETER
1994 Volkswagen Golf (1H1) L4-1.8L (ACC) Can
Cylinder Bore Diameter
1994 Volkswagen Golf (1H1) L4-1.8L (ACC) CanSECTION Cylinder Bore Diameter
DIMENSIONS
Piston Diameter:
Standard Size 80.985 mm (3.1884 inch)
1st Oversize 81.235 mm (3.1982 inch)
2nd Oversize 81.485 mm (3.2080 inch)
Deviation From Piston Diameter:
Maximum 0.04 mm (0.0016 inch)
Cylinder Bore Diameter:
Standard Size 81.010 mm (3.1894 inch)
1st Oversize 81.260 mm (3.1992 inch)
2nd Oversize 81.510 mm (3.2090 inch)
Deviation From Bore Diameter:
Maximum 0.08 mm (0.0031 inch)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.