Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN1991JETTA L4-1984CC 2.0L DOHCREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTIGNITION SYSTEMDISTRIBUTORDISTRIBUTOR CAPSERVICE AND REPAIR
1991 Volkswagen Jetta L4-1984cc 2.0L DOHC
Distributor Cap: Service and Repair
1991 Volkswagen Jetta L4-1984cc 2.0L DOHCSECTION Service and Repair
1. Note or mark spark plug wires and their position on cap.
2. Remove coil and plug wires.
3. Pry the two spring clips loose.
4. Slide the static shield off the cap.
5. Remove distributor cap.
6. Reassemble in reverse order.
2. Remove coil and plug wires.
3. Pry the two spring clips loose.
4. Slide the static shield off the cap.
5. Remove distributor cap.
6. Reassemble in reverse order.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.