Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
DTC U0305-57: Software Incompatibility with Cruise Control Module Invalid/Incompatible Software Component [10/2022 - ]: Procedure
- CHECK FOR DTCs
- Check for DTCs.
Body Electrical > Front Radar Sensor > Trouble Codes
Chassis > Front Recognition Camera > Trouble Codes
Result
Result Proceed to DTC U0305-57 (Front Radar Sensor) and U0322-57 (Front Recognition Camera) are output A Only DTC U0305-57 (Front Radar Sensor) is output B
Result:
A
REPLACE FORWARD RECOGNITION CAMERA. Refer to REMOVAL [10/2022 - ]
Result:
B
REPLACE MILLIMETER WAVE RADAR SENSOR ASSEMBLY. Refer to REMOVAL [10/2022 - ]
- Check for DTCs.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.