Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2025SEQUOIA CAPSTONEREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 233 (FRONT CAMERA SYSTEM - DIAGNOSTIC CODES)
2025 Toyota Sequoia Capstone
Section 233 (Front Camera System - Diagnostic Codes)
2025 Toyota Sequoia CapstoneSECTION Section 233 (Front Camera System - Diagnostic Codes)
WARNING: This page is about a different car, the 2024 Lexus RC 350, 2024 Lexus RC 300, 2023 Lexus RC 350, and 2023 Lexus RC 300. However, it is still accessible from the selected car via links, so may be relevant.
- Front Camera System
- Vehicle Control History [10/2022 - ]
- DTC C1000-1C: Control Module Internal Temperature Sensor "A" Circuit Voltage Out of Range; DTC C1005-1C: Control Module Internal Temperature Sensor "B" Circuit Voltage Out of Range; DTC C100A-62: Control Module Internal Temperature Sensor A/B Correlation Signal Compare Failure; DTC C1A93-46: Main Microcomputer in Front Recognition Camera Calibration/Parameter Memory Failure; DTC C1A94-45: Image Processing Microcomputer in Front Recognition Camera Program Memory Failure; DTC C1A94-47: Image Processing Microcomputer in Front Recognition Camera Watchdog/Safety MCU Failure; DTC C1A94-87: Image Processing Microcomputer to Main Microcomputer in Front Recognition Camera Missing Message; DTC C1A95-00: Image Processing Module Malfunction in Front Recognition Camera; DTC C1A96-1C: Power Supply Circuit in Front Recognition Camera Circuit Voltage Out of Range [10/2022 - ]
- DTC C1A4A-12: Buzzer Circuit Short to Battery [10/2022 - ]
- DTC C1A4A-14: Buzzer Circuit Short to Ground or Open [10/2022 - ]
- DTC C1A75-87: Steering Vibrator System Missing Message [10/2022 - ]
- DTC C1AA8-00: Front Recognition Camera Optical Axis Misalignment Malfunction [10/2022 - ]
- DTC C1AAE-00: Front Recognition Camera Heater Malfunction [10/2022 - ]
- DTC U0100-87: Lost Communication with ECM/PCM "A" Missing Message; DTC U0125-87: Lost Communication with Multi-axis Acceleration Sensor Module Missing Message; DTC U0126-87: Lost Communication with Steering Angle Sensor Module Missing Message; DTC U0129-87: Lost Communication with Brake System Control Module Missing Message; DTC U0130-87: Lost Communication with Steering Effort Control Module Missing Message; DTC U0134-87: Lost Communication with Power Steering Control Module Rear Missing Message; DTC U0140-87: Lost Communication with Body Control Module Missing Message [10/2022 - ]
- DTC U0300-51: Internal Control Module Software Incompatibility Not Programmed; DTC U0300-57: Internal Control Module Software Incompatibility Invalid/Incompatible Software Component [10/2022 - ]
- DTC U0322-51: Software Incompatibility with Body Control Module Not Programmed [10/2022 - ]
- DTC U0322-57: Software Incompatibility with Body Control Module Invalid/Incompatible Software Component [10/2022 - ]
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.