Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2025SEQUOIA CAPSTONEREPAIR AND DIAGNOSISENGINE PERFORMANCETESTING & DIAGNOSISENGINE CONTROL SYSTEM - DIAGNOSTIC CODES (09 OF 12)
2025 Toyota Sequoia Capstone
Engine Control System - Diagnostic Codes (09 Of 12)
2025 Toyota Sequoia CapstoneSECTION Engine Control System - Diagnostic Codes (09 Of 12)
- SFI System
- DTC P0A0A-13: High Voltage System Interlock Circuit "A" High Circuit Open; DTC P0A0A-92: High Voltage System Interlock Circuit "A" High Performance or Incorrect Operation [09/2022 - ]
- DTC P0A1B-94: Drive Motor "A" Control Module Performance Unexpected Operation [09/2022 - ]
- DTC P106A-62: Evaporative Emission System Pressure / Intake Air Pressure Signal Compare Failure; DTC P106C-62: Evaporative Emission System Pressure/Barometric Pressure Signal Compare Failure; DTC P106D-62: Evaporative Emission System Pressure Sensor - Turbocharger/Supercharger Boost Sensor Signal Compare Failure; DTC P109E-62: EVAP System Pressure Sensor "A"/Crankcase Pressure Sensor "A" Signal Compare Failure; DTC P109F-62: EVAP System Pressure Sensor "A"/Crankcase Pressure Sensor "B" Signal Compare Failure; DTC P14D7-62: EVAP System Pressure Sensor/Switch "A"/"D" Signal Compare Failure [09/2022 - ]
- DTC P107A-11: Fuel Rail Pressure Sensor (Low) / Fuel Rail Pressure Sensor "B" Circuit Short to Ground [09/2022 - ]
- DTC P107A-15: Fuel Rail Pressure Sensor (Low) / Fuel Rail Pressure Sensor "B" Circuit Short to Battery or Open [09/2022 - ]
- DTC P107A-2A: Fuel Rail Pressure Sensor (Low) / Fuel Rail Pressure Sensor "B" Signal Stuck in Range; DTC P107A-64: Fuel Rail Pressure Sensor (Low) / Fuel Rail Pressure Sensor "B" Signal Plausibility Failure [09/2022 - ]
- DTC P11EA-00: Bank 1 Air-Fuel Ratio Imbalance (Port); DTC P11EB-00: Bank 2 Air-Fuel Ratio Imbalance (Port); DTC P11EC-00: Cylinder #1 Air-Fuel Ratio Imbalance (Port); DTC P11ED-00: Cylinder #2 Air-Fuel Ratio Imbalance (Port); DTC P11EE-00: Cylinder #3 Air-Fuel Ratio Imbalance (Port); DTC P11EF-00: Cylinder #4 Air-Fuel Ratio Imbalance (Port); DTC P11F0-00: Cylinder #5 Air-Fuel Ratio Imbalance (Port); DTC P11F1-00: Cylinder #6 Air-Fuel Ratio Imbalance (Port); DTC P219A-00: Bank 1 Air-Fuel Ratio Imbalance; DTC P219B-00: Bank 2 Air-Fuel Ratio Imbalance; DTC P219C-00: Cylinder 1 Air-Fuel Ratio Imbalance; DTC P219D-00: Cylinder 2 Air-Fuel Ratio Imbalance; DTC P219E-00: Cylinder 3 Air-Fuel Ratio Imbalance; DTC P219F-00: Cylinder 4 Air-Fuel Ratio Imbalance; DTC P21A0-00: Cylinder 5 Air-Fuel Ratio Imbalance; DTC P21A1-00: Cylinder 6 Air-Fuel Ratio Imbalance [09/2022 - 09/2024]
- DTC P11EA-00: Bank 1 Air-Fuel Ratio Imbalance (Port); DTC P11EB-00: Bank 2 Air-Fuel Ratio Imbalance (Port); DTC P11EC-00: Cylinder #1 Air-Fuel Ratio Imbalance (Port); DTC P11ED-00: Cylinder #2 Air-Fuel Ratio Imbalance (Port); DTC P11EE-00: Cylinder #3 Air-Fuel Ratio Imbalance (Port); DTC P11EF-00: Cylinder #4 Air-Fuel Ratio Imbalance (Port); DTC P11F0-00: Cylinder #5 Air-Fuel Ratio Imbalance (Port); DTC P11F1-00: Cylinder #6 Air-Fuel Ratio Imbalance (Port); DTC P219A-00: Bank 1 Air-Fuel Ratio Imbalance; DTC P219B-00: Bank 2 Air-Fuel Ratio Imbalance; DTC P219C-00: Cylinder 1 Air-Fuel Ratio Imbalance; DTC P219D-00: Cylinder 2 Air-Fuel Ratio Imbalance; DTC P219E-00: Cylinder 3 Air-Fuel Ratio Imbalance; DTC P219F-00: Cylinder 4 Air-Fuel Ratio Imbalance; DTC P21A0-00: Cylinder 5 Air-Fuel Ratio Imbalance; DTC P21A1-00: Cylinder 6 Air-Fuel Ratio Imbalance [09/2024 - ]
- DTC P1235-13: High Pressure Fuel Pump Circuit Open [09/2022 - ]
- DTC P1283-00: Cold Start Fuel Injection Control Performance #1; DTC P1284-00: Cold Start Fuel Injection Control Performance #2; DTC P1285-00: Cold Start Fuel Injection Control Performance #3; DTC P1286-00: Cold Start Fuel Injection Control Performance #4; DTC P1287-00: Cold Start Fuel Injection Control Performance #5; DTC P1288-00: Cold Start Fuel Injection Control Performance #6 [09/2022 - ]
- DTC P1378-00: Pre-ignition Detected [09/2022 - ]
- DTC P1420-00: Evaporative Emission Canister (Small Leak); DTC P1421-00: Evaporative Emission Canister (Gross Leak) [09/2022 - ]
- DTC P1422-00: Evaporative Emission Fuel Tank (Small Leak); DTC P1423-00: Evaporative Emission Fuel Tank (Gross Leak) [09/2022 - ]
- DTC P1450-11: Fuel Tank Pressure Sensor Circuit Short to Ground; DTC P1450-15: Fuel Tank Pressure Sensor Circuit Short to Battery or Open; DTC P1450-2A: Fuel Tank Pressure Sensor Signal Stuck in Range; DTC P1450-2F: Fuel Tank Pressure Sensor Signal Erratic [09/2022 - ]
- DTC P148D-7E: Purge One Way Valve Stuck Open [09/2022 - ]
- DTC P14D2-11: Evaporative Emission System Pressure Sensor/Switch "D" Circuit Short to Ground [09/2022 - ]
- DTC P14D2-15: Evaporative Emission System Pressure Sensor/Switch "D" Circuit Short to Battery or Open [09/2022 - ]
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.