Driver Monitor Camera System

2025 Toyota Prius Plug-In Hybrid XSE PremiumSECTION Driver Monitor Camera System
DRIVER MONITOR CAMERA SYSTEM DIAGNOSTIC TROUBLE CODE (DTC) IDENTIFICATION

DTC Code Description
C1A30-00 Driver Monitor Camera Control System Internal Power Supply Failure
C1A31-08 Driver Monitor Camera Control System Bus Signal / Message Failure
C1A31-87 Driver Monitor Camera Missing Message
C1A31-96 Driver Monitor Camera Component Internal Failure
C1A34-71 LED Controller in Driver Monitor Camera Control System Actuator Stuck
C1A35-04 Processing Microcomputer in Driver Monitor Camera Control System System Internal Failure
C1A36-04 Monitoring Microcomputer in Driver Monitor Camera Control System Internal Failure
U0100-87 Lost Communication with ECM/PCM "A" Missing Message
U0101-87 Lost Communication with TCM Missing Message
U0126-87 Lost Communication with Steering Angle Sensor Module Missing Message
U0129-87 Lost Communication with Brake System Control Module "A" Missing Message
U0131-87 Lost Communication with Power Steering Control Module "A" Missing Message
U0140-87 Lost Communication with Body Control Module Missing Message
U0151-87 Lost Communication with Restraints Control Module Missing Message
U0155-87 Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message
U023A-87 Lost Communication with Image Processing Module "A" Missing Message
U0293-87 Lost Communication with Hybrid/EV Powertrain Control Module Missing Message
U0322-51 Software Incompatibility with Body Control Module Not Programmed
U0322-57 Software Incompatibility with Body Control Module Invalid/Incompatible Software Component
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.