Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2025PRIUS PLUG-IN HYBRID XSE PREMIUMREPAIR AND DIAGNOSIS (SINGLE PAGE)GENERAL INFORMATIONBRAKESMAP - ROUTINE INSPECTION REFERENCE GUIDEROUTINE INSPECTION REFERENCE GUIDEROUTINE INSPECTION - UICSENGINE PERFORMANCE AND MAINTENANCEPCV VALVES
2025 Toyota Prius Plug-In Hybrid XSE Premium
PCV Valves
2025 Toyota Prius Plug-In Hybrid XSE PremiumSECTION PCV Valves
| Condition | Code | Procedure |
|---|---|---|
| Application incorrect | B | Require replacement |
| At or beyond service interval | 3 | Suggest replacement to comply with vehicle's OEM recommended service intervals |
| Attaching hardware broken | A | Require repair or replacement of hardware |
| Attaching hardware missing | C | Require replacement of hardware |
| Attaching hardware not functioning | A | Require repair or replacement of hardware |
| Grommet broken | A | Require repair or replacement of grommet |
| Grommet missing | C | Require replacement of grommet |
| Grommet not functioning | A | Require repair or replacement of grommet |
| Inoperative | A | Require replacement |
|
NOTE:
Inoperative includes intermittent operation.
|
||
| Leaking | A | Require replacement |
| Missing | C | Require replacement |
| Restricted | A | Require replacement |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.