Typical Malfunction Thresholds

2025 Toyota Highlander XLE, FWDSECTION Typical Malfunction Thresholds
CASE 1

Following condition is met 2 data areas or more
Any of the following conditions (a), (b) or (c) are met More than 3 times
(a) EEPROM access error Occurred
(b) Permanent fault code Not stored
(c) Permanent fault code Not equal to commanded fault code
CASE 2

Following condition is met 2 data areas or more
Any of the following conditions (a) or (b) is met More than 3 times
(a) EEPROM access error Occurred
(b) Permanent fault code Stored
CASE 3

Either of the following conditions is met 1 or 2
1. Following condition is met 2 data areas or more
EEPROM access error occurred More than 3 times
2. Following condition is met More than 10 times
Permanent fault code data Mismatch
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.