Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2025HIGHLANDER XLE, FWDREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCESYSTEMENGINE CONTROL SYSTEM (T24A-FTS) - DIAGNOSTIC CODES (06 OF 11)SFI SYSTEMDTC P0606-94: CONTROL MODULE PROCESSOR UNEXPECTED OPERATION [11/2023 - ]MONITOR DESCRIPTION
2025 Toyota Highlander XLE, FWD
Monitor Description
2025 Toyota Highlander XLE, FWDSECTION Monitor Description
The ECM calculates the accelerator pedal opening angle value used for control and the value used for monitoring. If the ECM determines there is an excessive output while the engine is running, a DTC is stored and the MIL is illuminated.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.