Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Key-off Operation Function Operates even if Operating Conditions are not Satisfied [12/2019 - 11/2023]: Procedure
- CHECK MANUAL UP / DOWN FUNCTION
- Check that the manual up and down functions using the multiplex network master switch assembly, power window regulator switch assembly and rear power window regulator switch assembly (for LH or RH door) can operate the power windows.
Refer to OPERATION CHECK [12/2019 - ]
OK
Manual up and down functions are normal.
Result
Proceed to OK NG
Result:
NG
GO TO OTHER PROBLEM (Proceed to Problem Symptoms Table). Refer to PROBLEM SYMPTOMS TABLE [12/2019 - ]
Result:
OK
See step 2
- Check that the manual up and down functions using the multiplex network master switch assembly, power window regulator switch assembly and rear power window regulator switch assembly (for LH or RH door) can operate the power windows.
- CHECK REMOTE UP / DOWN FUNCTION
- Check that the remote up and down functions using the multiplex network master switch assembly can operate all of the power windows.
Refer to OPERATION CHECK [12/2019 - ]
OK
Remote up and down functions are normal.
Result
Proceed to OK NG
Result:
NG
GO TO OTHER PROBLEM (Proceed to Problem Symptoms Table). Refer to PROBLEM SYMPTOMS TABLE [12/2019 - ]
Result:
OK
See step 3
- Check that the remote up and down functions using the multiplex network master switch assembly can operate all of the power windows.
- CHECK KEY-OFF OPERATION FUNCTION
- Check the key-off operation function.
Refer to OPERATION CHECK [12/2019 - ]
Result
Result Proceed to Power window can be operated even after opening driver door or front passenger door within approximately 45 seconds of ignition switch being turned off A Power window can be operated even after approximately 45 seconds have elapsed since ignition switch was turned off (for All Doors) B Power window can be operated even after approximately 45 seconds have elapsed since ignition switch was turned off (for Driver Door or Front Passenger Door) C Power window can be operated even after approximately 45 seconds have elapsed since ignition switch was turned off (for Rear LH Door or Rear RH Door) D
Result:
B
REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU). Refer to REMOVAL [12/2019 - 10/2022] , or refer to REMOVAL [10/2022 - 11/2023]
Result:
C
REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY (for Driver Door or Front Passenger Door). Refer to REMOVAL [12/2019 - 10/2022] , or refer to REMOVAL [10/2022 - 11/2023]
Result:
D
REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY (for Rear LH Door or Rear RH Door). Refer to REMOVAL [12/2019 - 10/2022] , or refer to REMOVAL [10/2022 - 11/2023]
Result:
A
See step 4
- Check the key-off operation function.
- READ VALUE USING GTS (MAIN BODY)
- Read the Data List according to the display on the GTS.
Body Electrical > Main Body > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note FR Door Courtesy SW Front door courtesy light switch assembly (for RH) signal OFF or ON OFF: Front door RH closed
ON: Front door RH open- FL Door Courtesy SW Front door courtesy light switch assembly (for LH) signal OFF or ON OFF: Front door LH closed
ON: Front door LH open- Body Electrical > Main Body > Data List
Tester Display FR Door Courtesy SW FL Door Courtesy SW OK
On the GTS screen, ON or OFF is displayed accordingly.
Result
Proceed to OK NG
Result:
OK
REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU). Refer to REMOVAL [12/2019 - 10/2022] , or refer to REMOVAL [10/2022 - 11/2023]
Result:
NG
GO TO LIGHTING SYSTEM (Proceed to Front Door Courtesy Switch Circuit). Refer to Front Door Courtesy Switch Circuit [12/2019 - 11/2023]
- Read the Data List according to the display on the GTS.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.