DTC B2313: Glass Position Initialization Incomplete [12/2019 - ]: Description

2025 Toyota Highlander XLE, FWDSECTION Description

The power window regulator motor assemblies are operated by the multiplex network master switch assembly, power window regulator switch assembly or rear power window regulator switch assemblies. The power window regulator motor assembly has motor, regulator and ECU functions.

When the ECU built into a power window regulator motor assembly determines that the power window regulator motor assembly has not been initialized, DTC B2313 is stored.

D-DOOR MOTOR

DTC No. Detection Item DTC Detection Condition Trouble Area
B2313 Glass Position Initialization Incomplete
  • Power window regulator motor assembly (for driver door) not initialized
  • Power window regulator motor assembly (for driver door) is malfunctioning
  • Auxiliary battery disconnected when ignition switch ON
  • Power window regulator motor assembly (for driver door) not initialized
  • Power window regulator motor assembly (for driver door)
P-DOOR MOTOR

DTC No. Detection Item DTC Detection Condition Trouble Area
B2313 Glass Position Initialization Incomplete
  • Power window regulator motor assembly (for front passenger door) not initialized
  • Power window regulator motor assembly (for front passenger door) is malfunctioning
  • Auxiliary battery disconnected when ignition switch ON
  • Power window regulator motor assembly (for front passenger door) not initialized
  • Power window regulator motor assembly (for front passenger door)
RL-DOOR MOTOR

DTC No. Detection Item DTC Detection Condition Trouble Area
B2313 Glass Position Initialization Incomplete
  • Power window regulator motor assembly (for rear LH door) not initialized
  • Power window regulator motor assembly (for rear LH door) is malfunctioning
  • Auxiliary battery disconnected when ignition switch ON
  • Power window regulator motor assembly (for rear LH door) not initialized
  • Power window regulator motor assembly (for rear LH door)
RR-DOOR MOTOR

DTC No. Detection Item DTC Detection Condition Trouble Area
B2313 Glass Position Initialization Incomplete
  • Power window regulator motor assembly (for rear RH door) not initialized
  • Power window regulator motor assembly (for rear RH door) is malfunctioning
  • Auxiliary battery disconnected when ignition switch ON
  • Power window regulator motor assembly (for rear RH door) not initialized
  • Power window regulator motor assembly (for rear RH door)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.