Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

2025 Toyota Highlander XLE, FWD

DTC U0100-87: Lost Communication With ECM/PCM "A" Missing Message; DTC U0114-87: Lost Communication with Four-Wheel Drive Clutch Control Module Missing Message; DTC U0126-87: Lost Communication with Steering Angle Sensor Module Missing Message; DTC U0129-87: Lost Communication with Brake System Control Module Missing Message; DTC U0131-87: Lost Communication with Power Steering Control Module Missing Message; DTC U0140-87: Lost Communication with Body Control Module Missing Message; DTC U0151-87: Lost Communication with Restraints Control Module Missing Message; DTC U0163-87: Lost Communication with Navigation Control Module Missing Message; DTC U0164-87: Lost Communication with HVAC Control Module Missing Message; DTC U0168-87: Lost Communication with Vehicle Security Control Module Missing Message; DTC U0182-87: Lost Communication with Lighting Control Module Front Missing Message; DTC U0230-87: Lost Communication with Rear Gate Module Missing Message; DTC U0233-87: Lost Communication with Side Obstacle Detection Control Module "B" Missing Message; DTC U023A-87: Lost Communication with Image Processing Module "A" Missing Message; DTC U0293-87: Lost Communication With Hybrid Powertrain Control Module Missing Message; DTC U1103-87: Lost Communication with Stop and Start Control Module Missing Message; DTC U1110-87: Lost Communication with Intuitive Parking Assist Module Missing Message; DTC U1112-87: Lost Communication with Combination Switch Module Missing Message; DTC U1133-87: Lost Communication with PMN Module Missing Message [12/2019 - ]: Description

2025 Toyota Highlander XLE, FWDSECTION Description

The combination meter assembly communicates with each ECU via CAN communication.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area
U0100-87	Lost Communication With ECM/PCM "A" Missing Message	Diagnosis Condition: Ignition switch ON IG power source voltage is 9.5 V or more Malfunction Status: No communication with ECM Malfunction Time: 3.6 seconds or more	ECM CAN communication system Combination meter assembly
U0114-87	Lost Communication with Four-Wheel Drive Clutch Control Module Missing Message	Diagnosis Condition: Ignition switch ON IG power source voltage is 9.5 V or more Malfunction Status (for HV Model): No communication with hybrid vehicle control ECU Malfunction Status (for Gasoline Model): No communication with 4WD ECU assembly Malfunction Time: 5.0 seconds or more	Hybrid vehicle control ECU 4WD ECU assembly CAN communication system Combination meter assembly
U0126-87	Lost Communication with Steering Angle Sensor Module Missing Message	Diagnosis Condition: Ignition switch ON IG power source voltage is 9.5 V or more Malfunction Status: No communication with steering sensor Malfunction Time: 3.6 seconds or more	Steering sensor CAN communication system Combination meter assembly
U0129-87	Lost Communication with Brake System Control Module Missing Message	Diagnosis Condition: Ignition switch ON IG power source voltage is 9.5 V or more Malfunction Status (for HV Model): No communication with No. 2 skid control ECU (brake actuator assembly) Malfunction Status (for Gasoline Model): No communication with skid control ECU (brake actuator assembly) Malfunction Time: 1.0 seconds or more	No. 2 skid control ECU (Brake actuator assembly) Skid control ECU (Brake actuator assembly) CAN communication system Combination meter assembly
U0131-87	Lost Communication with Power Steering Control Module Missing Message	Diagnosis Condition: Ignition switch ON IG power source voltage is 9.5 V or more Malfunction Status: No communication with power steering ECU (rack and pinion power steering gear assembly) Malfunction Time: 3.6 seconds or more	Power steering ECU (Rack and pinion power steering gear assembly) CAN communication system Combination meter assembly
U0140-87	Lost Communication with Body Control Module Missing Message	Diagnosis Condition: Ignition switch ON IG power source voltage is 9.5 V or more Malfunction Status: No communication with main body ECU (multiplex network body ECU) Malfunction Time: 5.0 seconds or more	Main body ECU (Multiplex network body ECU) CAN communication system Combination meter assembly
U0151-87	Lost Communication with Restraints Control Module Missing Message	Diagnosis Condition: Ignition switch ON IG power source voltage is 9.5 V or more Malfunction Status: No communication with airbag sensor assembly Malfunction Time: 5.0 seconds or more	Airbag sensor assembly CAN communication system Combination meter assembly
U0163-87	Lost Communication with Navigation Control Module Missing Message	Diagnosis Condition: Ignition switch ON IG power source voltage is 9.5 V or more Malfunction Status (for 8 Inch Multi-display Type): No communication with radio and display receiver assembly Malfunction Status (for 12.3 Inch Multi-display Type): No communication with radio receiver assembly Malfunction Time: 5.0 seconds or more	Radio and display receiver assembly Radio receiver assembly CAN communication system Combination meter assembly
U0164-87	Lost Communication with HVAC Control Module Missing Message	Diagnosis Condition: Ignition switch ON IG power source voltage is 9.5 V or more Malfunction Status: No communication with air conditioning amplifier assembly Malfunction Time: 5.0 seconds or more	Air conditioning amplifier assembly CAN communication system Combination meter assembly
U0168-87	Lost Communication with Vehicle Security Control Module Missing Message	Diagnosis Condition: Ignition switch ON IG power source voltage is 9.5 V or more Malfunction Status: No communication with certification ECU (smart key ECU assembly) Malfunction Time: 5.0 seconds or more	Certification ECU (Smart key ECU assembly) CAN communication system Combination meter assembly
U0182-87	Lost Communication with Lighting Control Module Front Missing Message	Diagnosis Condition: Ignition switch ON IG power source voltage is 9.5 V or more Malfunction Status: No communication with headlight ECU sub-assembly LH Malfunction Time: 5.0 seconds or more	Headlight ECU sub-assembly LH CAN communication system Combination meter assembly
U0230-87	Lost Communication with Rear Gate Module Missing Message	Diagnosis Condition: Ignition switch ON IG power source voltage is 9.5 V or more Malfunction Status: No communication with multiplex network door ECU Malfunction Time: 5.0 seconds or more	Multiplex network door ECU CAN communication system Combination meter assembly
U0233-87	Lost Communication with Side Obstacle Detection Control Module "B" Missing Message	Diagnosis Condition: Ignition switch ON IG power source voltage is 9.5 V or more Malfunction Status: No communication with blind spot monitor sensor LH (B) Malfunction Time: 5.0 seconds or more	Blind spot monitor sensor LH (B) CAN communication system Combination meter assembly
U023A-87	Lost Communication with Image Processing Module "A" Missing Message	Diagnosis Condition: Ignition switch ON IG power source voltage is 9.5 V or more Malfunction Status: No communication with forward recognition camera Malfunction Time: 5.0 seconds or more	Forward recognition camera CAN communication system Combination meter assembly
U0293-87	Lost Communication With Hybrid Powertrain Control Module Missing Message	Diagnosis Condition: Ignition switch ON IG power source voltage is 9.5 V or more Malfunction Status: No communication with hybrid vehicle control ECU Malfunction Time: 3.6 seconds or more	Hybrid vehicle control ECU CAN communication system Combination meter assembly
U1103-87	Lost Communication with Stop and Start Control Module Missing Message	Diagnosis Condition: Ignition switch ON IG power source voltage is 9.5 V or more Malfunction Status: No communication with engine stop and start ECU Malfunction Time: 5.0 seconds or more	Engine stop and start ECU CAN communication system Combination meter assembly
U1110-87	Lost Communication with Intuitive Parking Assist Module Missing Message	Diagnosis Condition: Ignition switch ON IG power source voltage is 9.5 V or more Malfunction Status: No communication with clearance warning ECU assembly Malfunction Time: 5.0 seconds or more	Clearance warning ECU assembly CAN communication system Combination meter assembly
U1112-87	Lost Communication with Combination Switch Module Missing Message	Diagnosis Condition: Ignition switch ON IG power source voltage is 9.5 V or more Malfunction Status: No communication with steering sensor Malfunction Time: 10.0 seconds or more	Steering sensor CAN communication system Combination meter assembly
U1133-87	Lost Communication with PMN Module Missing Message	Diagnosis Condition: Ignition switch ON IG power source voltage is 9.5 V or more Malfunction Status: No communication with certification ECU (smart key ECU assembly) Malfunction Time: 3.6 seconds or more	Certification ECU (Smart key ECU assembly) CAN communication system Combination meter assembly

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.